ABC Hardware Crafts for Dolls...

       Below are links to our doll-sized hardware according to the alphabet. Many of these things have already been made and many more of them will soon be added in the near future.

Tiny two inch tools for 18 inch dolls.
These fit our toolbox for home improvement.

A is for Axe, Allen wrench and Anvil

B is for Bucket for general maintenance and cleanliness  and bellows and block and tackle

C is for Can for watering your doll's garden  and cans for collecting garbage here.

D is for Door Hardware Printable and How to Craft movable dollhouse doors...

E is for Electronics found in the technology for dolls index here. and E is also for Extinguisher for fires here.

F is for Feather dusters for swushing away grime... and also for flash lights made from golf tees found here.

G is for Garden equipment and workbench... and glue gun/glue

H is for Hammer and nails, hoe, handsaw, hangers and hex wrench . . .

I is for Ice scraper for the dolly's car in winter and "I" is also for Iron and Ironing Board.

J is for J ?

K is for Keyboard used with a computer, knee pads, knife and kitchen tools.

L is for Laundry detergents, and cleansing agents for taking care of dirty clothes and cleaning the dollhouse at large..., ladder, lantern and level

M is for Mop for absorbing water and mess, measuring tape, mallet and monkey wrench

N is for Needle-nose pliers

O is for Outdoor grill for barbecue here.

P is for Paint brush, paint rollers and other supplies to keep walls clean, fresh and pretty. Plus patio chairs and table here made from Popsicle sticks, Clothespins and Plastic.  Handy "P" Hand-Tools Include: Phillips screwdriver, plane, pickaxe, pliers, pruning shears, putty knife and pitchfork for now.

Q is for Q ?

R is for Ruler, rope etc . . .

S is for Sponges and scrub brushes and more. More "S" hardware includes: saw, safety glasses, shovel, spade, sand paper, squeegee, screwdriver and stapler.

T is for Toolbox for home improvement. More "T" hardware also includes: torch, tongs, tiller, trowel, and tape rolls.

U is for Utility cabinet for storing cleaning supplies

V is for V ?

W is for Windows made from cardboard frames and Printable versions: Stained glass windows for houses in color, for church school pictures in color, for a doll's Christian church in color, and for a garden view in color, garden views framed with mullions and for coloring to look the way you like listed here.  and W is for old-fashioned Washboards.

X is for X ?

Y is for Yard and lawn care tools and yardstick.

Z is for Z ?

ABC Tools for kids:

• A to Z Tools For Kids! - Make some of these for your doll's toolshed, garage or work shop!
  

DIY Doll Sized Tools and Tool Box

        This child-sized wooden tool box kit came from The Home Depot. I found it loose and unassembled at resale and thought it more an appropriate size for an 18" doll. Of course, I'm always thinking like that because I write for this blog! 

       Above, you can see all of the pieces from the kit and how easy it was for me to put it together. I used white school glue to initially hold it together, then, I hammered a few small nails at each corner to make the entire craft more durable.

I imagine this tool box could be easy to reproduce using cardboard if that is the only material you
have on hand. You will need a dowel rod or chopstick for the handle.

        I gave the tool box a coat or two of orange paint and used the stickers provided in the kit to enhance the flat, outside surfaces.

       Next, comes the fun part; collecting or crafting the 18" doll tools to keep inside our tool box. As I find or make these... I will upload them to this post.

As time passed, I decided to make a tray for this tool box in order to keep smaller things securely
in the bottom and display those tools used frequently on top.

First, I glued thin strips of cardboard around the interior of the tool box to hold the tray in place.

Secondly, I masked both the tray and the cardboard inserts to give these strength, durability
and a smooth surface for painting. The result with paint
is shown above, including some 2"tools. purchased
from a second-hand dealer.

• Visit our ABC for tool/hardware crafts here...

Make Mini Golf Tee Flashlights

These flashlights are so tiny!

       To make this simple craft you will need to collect: yellow beads, black acrylic paint, masking tape, tacky craft glue and old golf tees to recycle. If your golf tees are all white, collect more acrylic paints in the colors that you would like to paint the miniature flash lights.

       I used a hack saw to remove the pointed ends from the tees. Then I wrapped the ends with masking tape and also cut rectangular shapes from that same tape for the buttons. I painted these masking tape details black and then glued the yellow beads to each flat end of my tees to imitate flashlight bulbs. 

       Our tiny toys are the perfect size for playscale fashion dolls like Barbie to take camping. You can also craft miniatures like these for your scout troop's SWAPS!

How to Make Trash Cans for A Doll's Garage

Trash cans in the United States have decorative lids similar to the ones pictured
above. I also found an additional grey, plastic container that also looks very
much like a trash can to go inside my doll's garage. You can find all kinds
of containers to clean and recycle that will look like miniature versions of
things you find around the house in real life. 

       I crafted these realistic looking trash cans for a twelve inch doll's garage. (Barbie and Ken dolls) However, you can use larger or smaller recycled tin cans for larger or smaller dolls if you prefer. A tiny tomato paste can will suit a six inch doll's home and a larger 20 oz. recycled can will fit an American Girl's Doll house.

Supply List:

• 15 oz. tin cans
• foil tape or silver packing tape (Get this in a hardware store.)
• can opener (kitchen appliance)
• plastic juice bottles
• sturdy scissors
• masking tape
• cardboard
• plastic trash bags: white and black
• cotton batting
• box cutter or razor blade (Only adults may use this!)

Step-by-Step Directions:

1. Gather your supplies and remember that you must ask an adult to help you cut the garage can lid from the juice bottle's bottom with the box cutter before beginning.
2. Also ask an adult or older sibling to cut and clean the can of food before beginning as this may have a sharp edge. He or she may need to flatten that inside edge with the backside of a spoon before smoothing a large sticky piece of silver packing tape over it. Some can openers do not leave sharp edges and you will not need to worry about including this step if you own one like this.
3. Cut a narrow strip of cardboard to wrap and tape the edge of your trash can lip. While you are shaping this, continue to fit the lid over the tin can to make sure that it will fit once it is wrapped with aluminum tape.
4. Cover the entire trash can lid with aluminum tape to form the decorative lid.
5. Now line the interior of the trash can with a clean, trash bag cut down to fit the doll sized trash can.
6. Stuff your doll's trash bag with clean cotton and twist tie the ends shut.
7. Keep the trash cans inside your doll's garage and set them out curbside on the days that the imaginary trash collectors come by your doll's home.

      Above on the left you can see the empty, clean bottle of lemonade that I used to cut away a trash can lid for my project. The heavy, plastic molded pattern is on the bottom of this empty bottle and you will need to ask an older person to help you cut this out. On the right, is the bottom cut out and the cleaned tin can. I pressed a spoon around the inside lip of the can to smooth down any rough, sharp edges. Then I applied a very sticky aluminum tape to that cut area so that no child would be cut by the sharp edge.

      Above, you can see how the decorative stamped lid will fit onto the can. I also taped and glued a lip made from cardboard to the outside edge of the plastic lid before covering the entire lid's surface with very sticky aluminum tape.

     Left, I taped a cut piece of clean, black trash bag to the inside of my tin can. Then I filled the trash bag with clean cotton and twist tied the opening shut. Right, you can also turn the trash bag's edge over the top of the can like so if you want to create the illusion of the "can in use" for a doll display.

More Ideas for A Doll's Garage:

• For the doll that loves to work with wood...
• Miniature vintage toolboxes
• Garage & Gasstation miniatures